iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
401
Table 4.4.5.28-1 SYSTEM TIMERS
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Fax Detect timer
It is maximum fax tone detection time to deliver FAX call to fax
destination.
1~20
(1 sec.)
10
Auto Pause
Release timer
IPCR Mute function will be released by this auto pause released
timer.
0~255
(1 sec.)
0
UCS Ring ACK
Timer
UCS Client is ringing before expiring the Ring ACK timer and
afterwards will hear Error tones.
0~20
(seconds)
0
Short Modem
Timer
If {Short modem} of a SLT is ON, the SLT maintains the modem
mode for this time.
01~60
(1 sec.)
10
Button Idle Timer
When a button is pressed, auto idle timer is added.A button is
pressed in idle state, It goes to a menu list state(not calling
state).In menu list state, this auto idle timer is applied.
The button that is applied this timer is as below.
Transfer / PGM.
Speed.
Menu.
Directory.
Message.
Call Log.
Condition
The ButtonIdle timer is supported only below phones.
LIP-90xx series(9010/20/30/40)
LIP-80xxE series(8012E/24/40E)
LDP phones.
Firmware of LIP-90xx & LIP-80xxE series should be upgraded.
LIP-90xx: A.0Eb or later version
LIP-80xxE: A.1Fn or later version
The DECT phone and LIP-9070 do not support the Button Idle
timer.
00,
10-99
(1 sec.)
0
CCR No Digit
Error Timer
'CCR No Digit Error Timer' is the specific time when digit is not
entered after announcement.
After CCR no digit error timer, the call is routed to 'Error
destination' that set in CCR Table (228).
01-99
(100ms)
50
Fax No Answer
Timer
When Data(Fax) station number is defined in the analog CO
line, the incoming call is answered by system automatically to
detect the Fax tone.If the fax tone is not detected, the call is
routed to the ring assigned destination.If the destination does
not answer the call, it is disconnected after fax no answer timer
is expired.
10-99
(1 sec.)
30
