LG-Ericsson iPECS eMG100 Programming Manual Download

Page: 539 / 718

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual

Issue 2.3

522

Table 4.4.9.17-1 MOBILE EXTENSION TABLE

ATTRIBUTE

DESCRIPTION

RANGE

DEFAULT

Notify CLI

When the system sends CLI to the Mobile Extension, the CLI can
be either the original caller’s CLI or the CLI of the station.

Caller,

My Ext.

Caller

Call Back

If “ON”, an incoming Mobile Extension call will be released before

answered and system places a call to Mobile Extension. After the

Mobile answers, the dial tone is provided and the Mobile

Extension can place internal or external calls.

OFF

Delay Timer

When the Mobile Extension requests a Call Back, the system will

place the Call Back after expiration of this Delay timer.

0 ~ 255

Announcement

A system announcement can be recorded to provide the Mobile

caller with a menu of dialing commands available to the remote

Mobile user, remote control.

0-200

CO Group

The CO/IP Line group used to call (ring) the Mobile Extension is

defined.

eMG80/100:1~20, eMG800:1~200, UCP: 1~200

Refer to

description

Telephone

Number

The telephone number of the Mobile extension or Fail-over

number of the station must be assigned for proper operation.

Not

assigned

CLI Number

When the Mobile Telephone number and CLI do not match, the

CLI entered here is used to authorize incoming calls from the

Mobile.

Not

assigned

Suffix DID table

index to the CLI

An incoming DID call is passed to the Mobile Extension with the

iginal caller’s CLI and the Flexible DID Conversion Table index.

(format: ‘original CLI’ + ‘*’ + ‘DID Table Index’)

OFF/ON

OFF

Tel NumAs CLI

Num

If this option is set to ON, Telephone Number is used the same as

CLI Number.

That means, when the mobile user calls to his station, if

Telephone Number or CLI Number is matched with his mobile

number, then the mobile user hears system dial tone, and calling

to outside is available.

If this option is set to OFF, only CLI Number is matched, system

dial tone is served.

OFF/ON

Summary of Contents for iPECS eMG100















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands

LG-Ericsson iPECS eMG100, Programming Manual

Search results

Summary of Contents for iPECS eMG100

Reviews:

Related manuals for iPECS eMG100

Brands by name

Popular brands