iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual
Issue 2.3
298
Table 4.4.2.17-1 STATION VM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Default VM group
number
When the user has no Voice messages and selects the
[Call Back/Msg]
button, the “Default VM group number” is
called.
Auto Talk Recording
Option
This field enables unconditional recording of all calls
placed/received by the station. Recordings, in .wav format,
are stored at the UCS Client defined as the Call Recording
Station below.
OFF,
ALL,
CO
OFF
Auto Talk Recording
Destination
When Auto Call Recording is defined for a station, the
destination for the recording is defined here. The UCS
Client Station number, or an IPCR or 3rd party SIP
recording server.
Station or
Group
VSF MSG Date/Time
When ON, the data/time the message was received is
played to the user prior to the message.
OFF
ON
ON
VM Password check
When ON, the user must enter their valid Authorization
code to access their VSF Voice Mailbox. The password can
be defined as none, the Authorization code only or the
normal Station Number and Authorization code.
No password, Password only, Station number and
password
Refer to
description
Password
only
VMID Number
When using an adjunct VM, the system can translatethe
Mailbox number from the user’s station number tothe
assigned VMID. The system sends the stationnumber or
VMID, if assigned, to the VM (in-band or SMDI) in orderto
identify the appropriate Voice Mailbox.
Default: eMG80/100:100, eMG800:1000, UCP:1000
Max. 8 digit
Refer to
description
Retrieve MSG
Method
Messages stored in the VSF may be retrieved in eithera
FIFO (first-in-first-out) or LIFO (last-in-first-out) orderbased
on this entry.
FIFO/
LIFO
LIFO
Wake-Up
Announcement
A VSF system announcement can be recorded to play to
the station as a Wakeup Announcement.
0-200
0
Two way record
announcement
The two way record announcement can be recorded to play
to the station as Announcement.
0-200
0
Message Wait
Notice(MWI, CLI, VM)
When a user has voice mail, system can provides this as
voice prompt instead of dial tone according to option based
on station.
Disable:
System provides normal dial tone when a
user goes to off hook status.
Tone:
System provides warning tone instead of dial
tone to give indication when a user goes to off hook
status.
Prompt:
System provides message indication as
voice prompt when a user goes to off hook status.
DECT phone do not support this feature.
Disable,
Tone,
Prompt
Tone
