Press to mute the microphone during a call. Press it again to un-mute the call.
Call Mute/Un-mute
1. To place a call on hold:
Press the
Hold
soft key during an active call.
2. To resume the call, do one of the following:
If there is only a call on hold, Press the
Resume
soft key.
If there is more than one call on hold, tap the desired one and press the
Resume
soft key.
Call Hold/Resume
Quick Reference Guide
(V70.0)
www.yealink.com
Copyright 2012 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
For more information, refer to the User Guide available online at:
http://www.yealink.com/index.php/Support/
Ring Tones
1. Tap
Menu
->
Basic
->
Sound
->
Ring Tones
.
2. Press or to select the desired ring tone.
3. Press the
Set Ring Tones
soft key to accept the change.
Call Transfer
Call Forward
Call Conference
You can transfer a call in the following ways:
Blind Transfer
1. Press the
Transfer
soft key during an active call. The call is placed on hold
.
2. Enter the number you want to transfer the call to.
3. Press
the
Transfer
soft key
.
Semi-Attended Transfer:
1. Press the
Transfer
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer the call to, and then press or the
Send
soft key.
3. Press the
Transfer
soft key when you hear the ring-back tone.
Attended Transfer:
1. Press the
Transfer
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer the call to, and then press or the
Send
soft key.
3. Press the
Transfer
soft key when the second party answers the call.
1. Tap
Menu
->
Call Feature
->
Call Forward
.
2. Select the desired forward type:
Always Forward
------------Incoming calls are forwarded unconditionally.
Busy Forward
---------------Incoming calls are forwarded when the phone is busy.
No Answer Forward
-------Incoming calls are forwarded when the phone is not answered after a
preset time period.
3. Enter the number you want to forward the call to. For
No Answer Forward
, enter the ring time to
wait before forwarding.
1. Press the
Conference
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conference
soft key again when the second party answers. All parties are now in the
conference.
4. Hang up the call to disconnect all parties.
Note:
You can split the conference call into two individual calls by tapping the
Split
icon.
