background image

900MHz Cordless Phone

Model No.

KX-TC1460B

KX-TC1460W/KX-TC1461B

Pulse-or-tone dialing capability

Operating Instructions

PLEASE READ BEFORE USE
AND SAVE.

PQQX13231ZA

F1001-0

D

1 Getting Started
2 Making/Answering Calls
3 Speed Dialer
4 Special Features
5 Things You Should Know
6 Referencia rápida

Contents by Section

Charge the battery for 15 hours

before initial use.

KX-TC1461B

n 6

e
ar

RAM)

.

rtátil.
moria.

.

)

o

(9)

)

For your future reference
Serial No.

Date of purchase

(found on the bottom of the unit)

Name and address of dealer

For product service

Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an
authorized servicenter.

Panasonic’s e-mail address for customer inquiries: 
[email protected]
for customers in the USA or Puerto Rico ONLY

When you ship the product

Carefully pack your unit, preferably in the original carton.

Attach a letter, detailing the symptom, to the outside of the carton.

Symptom

Send the unit to an authorized servicenter, prepaid and adequately
insured.

Do not send your unit to the Panasonic Consumer Electronics Company
listed below or to executive or regional sales offices. 
These locations do not repair consumer products.

Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park
Carolina, Puerto Rico 00985

Attach your purchase receipt here.

Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico

PQQX13231ZA 

 

01.11.13 

2:33 

PM 

  y [ W  14

Summary of Contents for KX-TC1461B - Cordless Telephone













Reviews: