background image

Summary of Contents for KX-TC1447

Page 1: ... Up the Unit Connect as shown Power Outlet G Single Line Telephone Jack For maximum range place the base unit in a HIGH and CENTRAL location with no obstructions or interference from electrical appliances The AC adaptor must remain connected B CE 2 Charge the battery for about 4 hours before initial use Place the handset on the base unit The IN USE CHARGE indicator lights Printed in Malaysia 1 IN ...

Page 2: ... is subject to grease dust or high humidity If not the battery may not charge properly To install the belt clip or the headset see pages 12 and 13 in the Operating Instructions Selecting the Dialing Mode You can program the dialing mode by using the handset near the base unit Your phone comes from the factory set to TONE If you cannot dial set to PULSE The TALK and SP PHONE indicator lights must b...

Page 3: ... 1 To hang up press ISP PHONE 1 or I REMOTE SP 1 Like a standard telephone you can dial with the base unit keypad after pressing ITALK With the base unit 1 Press 1 SP PHONE Answering Calls With the handset If the handset is off the base unit press TALKJ OR Dial a telephone number If on the base unit just lift up 3 e eog l Talk into the MIC To hang up press 1 SP PHONE With the base unit Press 1 SP ...

Page 4: ... repeat steps 1 through 4 To dial a stored number in the handset 1 Press TALK 2 Press AUTO w CID w w CD G Press a memory station number to ID 3 Press the memory station number The stored number is dialed To store a phone number in the base unit The TALK and SP PHONE indicator lights must be off before programming 3 OE l TMltlGRAAI 3 r 1 i llEO W l Yl Y 0 1 1 1 Press Enter a phone Pres_s AUTO PROGR...

Reviews: