Lenovo System x3550 M5 Installation And Service Manual Download Page 300 | Manualshive

Page: 300 / 1144

background image

Automatically contact Service

If this field is set to

Yes

, and you have enabled Electronic Service Agent (ESA), Lenovo Support will be

notified automatically if the event is generated.

While you wait for Lenovo Support to call, you can perform the recommended actions for the event.

User response

The actions that you should perform to solve the event.

Perform the steps listed in this section in the order shown until the problem is solved. After you perform
all of the actions that are described in this field, if you cannot solve the problem, contact Lenovo Support.

Note:

This list includes error codes and messages that might not apply to this machine type and model.

The following is the list of IMM2.1 error messages and suggested actions to correct the detected server
problems. For more information about IMM2.1, see the

Integrated Management Module II User's Guide

at http://publib.boulder.ibm.com/infocenter/systemx/documentation/topic/com.lenovo.sysx.imm2.doc/
product_page.html.

IMM Events that automatically notify Support

You can configure the Integrated Management Module II (IMM2) to automatically notify Support (also known
as

call home

) if certain types of errors are encountered. If you have configured this function, see the table for

a list of events that automatically notify Support.

Table 47. Events that automatically notify Support

Event ID

Message String

Automatically
Notify Support

40000086-00000000

Test Call Home Generated by user [arg1].

Yes

40000087-00000000

Manual Call Home by user [arg1]: [arg2].

Yes

400000cb-00000000

The RAID controller has problem with the battery.
Please contact technical support to resolve this
issue.([arg1],[arg2],[arg3],[arg4],[arg5])

Yes

400000cc-00000000

The RAID controller detected
unrecoverable error. The controller needs
replacement.([arg1],[arg2],[arg3],[arg4],[arg5])

Yes

400000d5-00000000

One or more virtual drives have problem.
Please contact technical support to resolve this
issue.([arg1],[arg2],[arg3],[arg4],[arg5])

Yes

400000d6-00000000

Drive error was detected by RAID controller.
Please contact technical support to resolve this
issue.([arg1],[arg2],[arg3],[arg4],[arg5])

Yes

80010202-0701ffff

Numeric sensor [NumericSensorElementName] going low
(lower critical) has asserted. (CMOS Battery)

Yes

80010902-0701ffff

Numeric sensor [NumericSensorElementName] going
high (upper critical) has asserted. (SysBrd 12V)

Yes

806f0021-2201ffff

Fault in slot [PhysicalConnectorSystemElementName] on
system [ComputerSystemElementName]. (No Op ROM
Space)

Yes

806f0021-2582ffff

Fault in slot [PhysicalConnectorSystemElementName] on
system [ComputerSystemElementName]. (All PCI Error)

Yes

286

Lenovo System x3550 M5 Installation and Service Guide

«
...
298
299
300
301
302
...
»

Summary of Contents for System x3550 M5

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3550 M5

e Server iSeries 825

Brand: IBM Pages: 52

Brand: B&B Electronics Pages: 67

Brand: AXIOMTEK Pages: 58

Netfinity 3500 Series

Brand: IBM Pages: 152

FusionServer 1288H V5

Brand: xFusion Digital Technologies Pages: 96

AcquiLite EMB A7810

Brand: Obvius Pages: 29

Brand: Huawei Pages: 2

Brand: Huawei Pages: 52

Brand: Huawei Pages: 122

Brand: Huawei Pages: 131

UPS5000-E-****-FM series

Brand: Huawei Pages: 261

Brand: Gigabyte Pages: 108

Brand: CNET Pages: 14

Brand: XtendLan Pages: 54

Brand: Red Hat Pages: 120

Brand: Planet Pages: 90

Brand: Black Box Pages: 2

Brand: Black Box Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands