Lenovo System x3550 M5, Installation And Service Manual

Page: 243 / 1144

Step 4. Align the flash device with the connector on the system board and push it into the USB connector
until it is firmly seated.
USB embedded
hypervisor
flash device
Figure 148. USB hypervisor flash device installation
Step 5. Reconnect the power cords and any cables that you removed.
Step 6. Reinstall the cover (see “Replacing the cover” on page 120).
Step 7. Slide the server into the rack.
Step 8. Turn on the peripheral devices and the server.
Removing the coin-cell battery
Use this information to remove the coin-cell battery.
The following notes describe information that you must consider when replacing the coin-cell battery.
• Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly
to avoid possible danger. If you replace the coin-cell battery, you must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
• If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of with normal domestic waste. They will be taken back
free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a
proper manner.
• To order replacement batteries, call 1-800-IBM-SERV within the United States, and 1-800-465-7999 or
1-800-465-6666 within Canada. Outside the U.S. and Canada, contact your Lenovo sales representative
or Lenovo reseller.
Note: After you replace the coin-cell battery, you must reconfigure the server and reset the system
date and time.
Chapter 5
.
Removing and replacing components
229