manualshive.com logo in svg

Lenovo System x3550 M5, Installation And Service Manual

The Lenovo System x3550 M5 is a powerful and versatile server designed for exceptional performance and reliability. Its comprehensive product manual provides valuable guidance for hassle-free installation and operation. Download the user manual for free from our website, ensuring a seamless experience with your Lenovo System x3550 M5.

Share
Download
background image

Note:

Remove the PCI bracket that comes with either the ServeRAID M5210, ServeRAID M1215, or

ServeRAID M5225 adapter before installing it in the dedicated connector on the system board.

You can replace the ServeRAID controller with another supported ServeRAID controller. For a list of
supported ServeRAID controllers, see http://www.lenovo.com/ serverproven/.

Notes:

• For brevity, in this documentation the ServeRAID SAS/SATA controller is often referred to as the

SAS/SATA

adapter

or the

ServeRAID adapter

.

• If possible, back up or record your RAID configuration information before replacing the adapter. See the

documentation for your RAID adapter for information and instructions. Documentation for ServeRAID
adapters can be downloaded from http://www.lenovo.com/support.

Step 1.

Read the safety information that begins on “Safety” on page v and “Installation guidelines” on
page 116.

Step 2.

Turn off the server and peripheral devices and disconnect all power cords.

Step 3.

Remove the cover (see “Removing the cover” on page 119).

Step 4.

If you are installing a new or replacement SAS/SATA adapter, touch the static-protective package
that contains the new SAS/SATA adapter to any unpainted metal surface on the server. Then,
remove the new SAS/SATA adapter from the package.

Step 5.

Align the SAS/SATA adapter so that the keys align correctly with the connector on the system board.

Step 6.

Insert the SAS/SATA adapter in the dedicated connector on the system board or the PCI riser-card
assembly slot.

Attention:

1. Incomplete insertion might cause damage to the server or the adapter.

2. Note the order and position of the cables to the RAID card prior to service. Misconnecting the

hard disk drive cables may result in a lost RAID array.

Steps for inserting a SAS/SATA adapter in the dedicated connector on the system board

186

Lenovo System x3550 M5 Installation and Service Guide

Summary of Contents for System x3550 M5

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3550 M5

IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual preview
eServer BladeCenter JS20 Type 8842
Brand: IBM Pages: 150
SMC Sierra Monitor FS-8704-14 Driver Manual preview
FS-8704-14
Brand: SMC Sierra Monitor Pages: 42
NEC Express5800/320Fa-L User Manual preview
Express5800/320Fa-L
Brand: NEC Pages: 406
TYAN GC68-B8036 Service Engineer'S Manual preview
GC68-B8036
Brand: TYAN Pages: 106
Supermicro SUPERSERVER 5019S-M User Manual preview
SUPERSERVER 5019S-M
Brand: Supermicro Pages: 65
Advantech DVG-1100 Manual preview
DVG-1100
Brand: Advantech Pages: 43
Ericsson HL950 Administrator'S Manual preview
HL950
Brand: Ericsson Pages: 159
3onedata NP301 User Manual preview
NP301
Brand: 3onedata Pages: 24
Coachsound TourMaster MLA2504 User Manual preview
TourMaster MLA2504
Brand: Coachsound Pages: 22
Dataton WATCHPAX 60 User Manual preview
WATCHPAX 60
Brand: Dataton Pages: 37
Planet FPS-1PW User Manual preview
FPS-1PW
Brand: Planet Pages: 87
TAG SV-2003-X2 Operation Manual preview
SV-2003-X2
Brand: TAG Pages: 72
Silicon Graphics InfiniteStorage 3000 User Manual preview
InfiniteStorage 3000
Brand: Silicon Graphics Pages: 50
Silicon Graphics International SGI UV 30 User Manual preview
SGI UV 30
Brand: Silicon Graphics International Pages: 68
Silicon Graphics UV 2000 System User'S Manual preview
UV 2000
Brand: Silicon Graphics Pages: 116
Rittal 7999.009 Operating Instructions Manual preview
7999.009
Brand: Rittal Pages: 40
Dell EMC E02B Installation And Service Manual preview
E02B
Brand: Dell EMC Pages: 108
Dell EMC PowerEdge R7525 Installation And Service Manual preview
PowerEdge R7525
Brand: Dell EMC Pages: 209

Brands by name

Popular brands

Load more brands