POST
When you turn on the server, it performs a series of tests to check the operation of the server components
and some optional devices in the server. This series of tests is called the power-on self-test, or POST.
Note:
This server does not use beep codes for server status.
If a power-on password is set, you must type the password and press Enter (when you are prompted),
for POST to run.
If POST detects a problem, an error message is displayed. See Appendix B “UEFI/POST diagnostic codes”
on page 925 for more information.
If POST detects a problem, an error message is sent to the POST event log, see “Event logs” on page
64 for more information.
Dynamic System Analysis
Dynamic System Analysis (DSA) collects and analyzes system information to aid in diagnosing server
problems.
DSA collects the following information about the server:
• Drive health information
• Event logs for ServeRAID controllers and service processors
• Hardware inventory, including PCI and USB information
• Light path diagnostics status
• Network interfaces and settings
• Performance data and details about processes that are running
• RAID controller configuration
• Service processor (integrated management module) status and configuration
• System configuration
• Vital product data and firmware information
• IMM configuration information
• IMM environmental information
• Option card driver and firmware information
For system-specific information about the action that you should take as a result of a message that DSA
generates, see Appendix C “DSA diagnostic test results” on page 949.
If you cannot find a problem by using DSA, see “Solving undetermined problems” on page 89 for information
about testing the server.
Note:
DSA Preboot might appear to be unresponsive when you start the program. This is normal operation
while the program loads.
Make sure that the server has the latest version of the DSA code. To obtain DSA code and the
Dynamic System Analysis Installation and User's Guide
, go to https://support.lenovo.com/us/
67
Summary of Contents for System x3550 M5
