Leica 14051454200 Instructions For Use Manual Download Page 159

Page: 159 / 164

159

HistoCore SPECTRA CV

Warranty and Service

10. Warranty and Service

Warranty

Leica Biosystems Nussloch GmbH guarantees that the contractual product delivered has been subjected

to a comprehensive quality control procedure based on the Leica in-house testing standards, and that the

product is faultless and reflects all technical specifications and/or agreed characteristics.

The scope of the warranty is based on the content of the concluded agreement. The warranty terms of

your Leica sales organization or the organization from which you have purchased the contractual product

shall apply exclusively.

Yearly Preventive Maintenance

Leica recommends to conduct a yearly preventive maintenance. This has to be performed by a qualified

Leica Service Representative.

Service information

If you are in need of technical customer support or spare parts, please contact your Leica representative

or the Leica dealer where you purchased the instrument.

Please provide the following information on the instrument:

•

Model name and serial number of the instrument.

•

Location of the instrument and name of a contact person.

•

Reason for the service call.

•

The delivery date of the instrument. .

Summary of Contents for 14051454200





































































































































































Search results

Summary of Contents for 14051454200

Reviews:

Related manuals for 14051454200

Brands by name

Popular brands

Leica 14051454200, Instructions For Use Manual

Search results

Summary of Contents for 14051454200

Reviews:

Related manuals for 14051454200

Brands by name

Popular brands