Leica 14051454200 Instructions For Use Manual Download Page 115

Page: 115 / 164

115

HistoCore SPECTRA CV

Cleaning and Maintenance

Note

•

Carefully attach the suction cups with a bent tweezers to avoid damage to the new suction cups.

• Make sure that the suction cups fit correctly. Coverglass cannot be picked up if the suction cups are

fastened incorrectly.

• We recommend having a rack filled with empty slides coverslipped for a function check.

Fig. 92

7.2.12 Cleaning the waste tray

Warning

Wear cut-resistant safety gloves

(

→

P. 18 – 3.1 Standard delivery – packing list)

for emptying the

waste tray!

For handling, removing and re-inserting the waste tray, see

(

→

P. 86 – 6.3.4 Emptying the waste tray)

» Soak a lint-free cloth with xylene and remove any mounting medium residue that may be present.

Note

Dispose of glass shards, splinters and dust in accordance with laboratory specifications.

Summary of Contents for 14051454200





































































































































































Search results

Summary of Contents for 14051454200

Reviews:

Related manuals for 14051454200

Brands by name

Popular brands

Leica 14051454200, Instructions For Use Manual

Search results

Summary of Contents for 14051454200

Reviews:

Related manuals for 14051454200

Brands by name

Popular brands