Leica 14051454200, Instructions For Use Manual

Page: 86 / 164

86
Version 2.1, Revision K
Daily Instrument Setup
6
6.3.4 Emptying the waste tray
Note
The HistoCore SPECTRA CV automatically detects defective/broken coverglass and places it in the
waste tray.
Warning
Wear cut-resistant safety gloves ( → P. 18 – 3.1 Standard delivery – packing list) for emptying the
waste tray!
1. Open the hood.
2. Check the waste tray for broken coverglasses.
3. If broken coverglass exist, remove the waste tray (
→
Fig. 65- 1 ) and clean it.
4. Then insert the waste tray back in the position provided for it ( → Fig. 65- 2 ) .
1
2
Fig. 65
5. Close the hood again.
6.3.5 Inspect Pick&Place module
1. Open the hood.
2. Check skids (
→
Fig. 66- 1 ) , suction cups front and rear (
→
Fig. 66- 2 ) and coverglass sensor
pin ( → Fig. 66- 3 ) for dirt and clean if necessary ( → P. 114 – 7.2.10 Cleaning the Pick&Place
module) .
3. Close the hood again.