Leica 14051454200, Instructions For Use Manual

Page: 35 / 164

35
HistoCore SPECTRA CV
Installation and Instrument Setup
4
Note
The insertion of a mounting medium bottle in the coverslip line L1 is described below. The same
procedures also apply for the coverslip line L2 .
1. Take the mounting medium bottle (
→
Fig. 15) out of the packaging and remove the black
plastic cap (
→
Fig. 15- 1 ) .
Note
Do not dispose of the black cover cap. If a non-empty bottle of mounting medium is taken out of the
instrument (e.g. in the event of transport), it can be closed up again using the black plastic cap and
retained. However, while doing so, the expiration date of the opened bottle must be observed.
Warning
• Do not remove the white plastic seal (
→
Fig. 15- 2 ) . It must remain on the bottle.
• Before the initial insertion of the cannulas, check whether the caps on the ends of the cannulas
have been removed.
1
2
3
4
Fig. 15
2. Insert the mounting medium bottle into the recess L1 and make sure that the RFID chip
(
→
Fig. 15- 4 ) is seated in the notch of the recess (
→
Fig. 16- 5 ) .