Leica 14051454200, Instructions For Use Manual

Page: 83 / 164

83
HistoCore SPECTRA CV
Daily Instrument Setup
6
1
2
Fig. 60
Note
New processing in the L2 coverslip line is only possible after the insertion of a new coverglass
cartridge.
To change the coverglass cartridge, proceed as follows:
1. Open the hood.
2. The Pick&Place module (
→
Fig. 61- 1 ) is located above the waste tray (
→
Fig. 61- 2 ) .
3. Remove the coverglass cartridge ( → Fig. 61- 3 ) that is present in the instrument from the slot
for the cartridge ( → Fig. 61- 4 ) .
Note
• If there are still coverglass present in the magazine, up to 30 slip of remaining cover glass can be
inserted in the new coverglass cartridge. These are added on to the new coverglass cartridge and
displayed in the Module Status.
• Ensure that the coverglass is inserted correctly in the magazine (
→
Fig. 64) .
4. Dispose of the empty coverglass cartridge in accordance with the laboratory regulations.