Leica 14051454200, Instructions For Use Manual

Page: 67 / 164

67
HistoCore SPECTRA CV
Operation
5
5.9.1 Creating a new parameter set
1. To create a new parameter set, press the New button ( → Fig. 42- 1 ) in the parameter set menu.
2. In the following open menu, an incremental adjustment of the application volume (max. 5/min.
-5) can take place (
→
P. 71 – 5.9.5 Adjustment of the application volume) . For this purpose
set the desired volume by turning the roller (
→
Fig. 43- 1 ).
3. Finally press the Save button (
→
Fig. 43- 2 ) .
The newly created parameter set is now saved and can be selected in the parameter set menu
( → Fig. 42) .
L
To discard the parameter set, press the Cancel (
→
Fig. 43- 3 ) button.
1
2 3
Fig. 43
5.9.2 Assigning a parameter set to a rack handle color
Note
One or more rack handle color(s) can be assigned to each parameter set. For this purpose the
Supervisor user status is required.
1. In the parameter set menu (
→
Fig. 44) , tap on the corresponding entry to select the parameter
set to which a rack handle color is to be assigned (
→
Fig. 44- 1 ) .
2. Pressing the Color (
→
Fig. 44- 2 ) button displays a selection field (
→
Fig. 45) , that allows the
assignment of the rack handle color to the selected parameter set.