Leica 14051454200, Instructions For Use Manual

Page: 76 / 164

76
Version 2.1, Revision K
Daily Instrument Setup
6
6.2 Switching on and shutting down the instrument
Switching on the instrument
1. To start the instrument, press the Operating switch (
→
Fig. 52- 1 ) illuminated in red.
2. During initialization, a verification of all modules and consumables is carried out automatically.
The Operating switch (
→
Fig. 52- 1 ) is illuminated in green whenever the instrument is ready to
start.
L
After completing the initialization phase, the main menu (
→
Fig. 19) appears on the screen.
and the user is informed (
→
Fig. 51) that a Quick Prime is required for the coverslip line in use.
Acknowledge the messages by pressing Ok (
→
Fig. 51- 1 ) and follow the instructions that follow
(
→
P. 118 – 7.3 Preparing the hose system for priming and cleaning) .
1 1
Fig. 51
Shutting down the instrument
1. To switch the instrument into standby mode (e.g. overnight), press the Operating switch twice. It
then illuminates in red (
→
Fig. 52- 1 ) .
1
Fig. 52
L
For cleaning and maintenance, observe the notes in (
→
P. 105 – 7.1 Important notes about
cleaning this instrument) .