Leica 14051454200, Instructions For Use Manual

Page: 49 / 164

49
HistoCore SPECTRA CV
Operation
5
2. A keyboard (
→
Fig. 28) is then displayed which can be used to enter the password.
Fig. 28
1
3. The entry is finished by confirming with OK (
→
Fig. 28- 1 ) and the entered password is checked
for validity.
The current user status is displayed with the respective symbol in the status bar (
→
Fig. 20) on
the top right.
Note
The password configured at the factory should be changed during the initial setup.
To change the supervisor password, proceed as follows:
1. To change the password, press the Change Password button (
→
Fig. 27- 2 ) and enter the old
password.
2. Then, enter the new password twice using the keyboard and confirm with OK .
Note
A password must have at least 4 characters and may have up to 16 characters.