Leica 14051454200, Instructions For Use Manual

Page: 97 / 164

97
HistoCore SPECTRA CV
Daily Instrument Setup
6
6.6.1 Monitoring the coverslipping operation
The user can retrieve and monitor details regarding the ongoing coverslipping operations using the
process status display (
→
P. 42 – 5.3 Process status display) :
• Process status display with calculated remaining coverslipping time, real time at the end of processing,
coverslip line used, parameter set number (
→
P. 42 – 5.3 Process status display) .
• The status bar (
→
P. 41 – 5.2 Elements of the status display) with the date, time, "process" icon,
user status and icons indicating messages and warnings that occurred.
• The position of the rack is detected in the load and unload drawer using RFID.
Note
The last 20 active messages and warnings can be called up by touching the corresponding symbols
in the status bar ( → Fig. 20- 4 ) ( → Fig. 20- 5 ) . This allows the user to learn about past and current
situations and to initiate any required actions.
6.6.2 Coverslipping operation finished
• If a rack ran the coverslipping operation, it will be transported in the unload drawer.
• The unload drawer can hold up to 9 racks. The racks are placed in the unload drawer in the sequence
shown from A1 to C9 ( → Fig. 75) .
A B C
1
6
2
7
3
8
4
5
9
Fig. 75