Leica 14051454200, Instructions For Use Manual

Page: 25 / 164

25
HistoCore SPECTRA CV
Installation and Instrument Setup
4
4.2 Electrical connection
Warning
• Use only the power cable provided, which is intended for the local power supply.
• Before connecting the instrument to the power supply, make sure that the Main switch on the
bottom front of the instrument (
→
Fig. 1- 8 ) is in the OFF ("0") position.
1. Connect the power cable to the power input socket on the rear panel of the instrument
( → Fig. 4- 1 ).
2. Plug the power plug into a grounded power socket.
3. Switch on the Main switch (
→
Fig. 1- 8 ) .
1
Fig. 4
4. After a short period of time, the Operating switch lights up orange. Once the software has
finished starting up, the switch lights up red ( → Fig. 5- 1 ) and the instrument is in standby
mode.
5. The Operating switch can then be operated.
1
Fig. 5