Leica 14051454200, Instructions For Use Manual

Page: 96 / 164

96
Version 2.1, Revision K
Daily Instrument Setup
6
Note
• The slides are not processed sequentially, i.e. they are not coverslipped in sequence.
• The schematic display (
→
Fig. 74) of a rack (
→
Fig. 74- 1 ) with inserted slides (
→
Fig. 74- 2 )
shows the sequence during processing.
• The first five slides are coverslipped at the beginning ( → Fig. 74- 3 ) . Then the rack moves upwards
and continues the coverslipping with the lowest slide (
→
Fig. 74- 4 ) . The sixth slide (counted from
above) is coverslipped last. This procedure prevents the lowest slide from drying out.
• Finished coverslipped slides are moved back to their original position within the rack.
• The instrument detects and indicates when a rack has been inserted in the wrong orientation and
has to be corrected by the user.
• The system detects if a rack has been inserted into the load drawer with a rack handle color for
which no parameter set is active, and the user is informed by a corresponding message. The rack
must be removed from the instrument. Corresponding to the startable parameter sets (
→
P. 42 –
5.3 Process status display) , attach the correct colored handle to the rack and re-insert it into the
load drawer.
• Racks that are inserted into the left-side reagent vessel in the load drawer are coverslipped in the
L1 coverslip line. Racks from the right-side vessel are coverslipped in the L2 coverslip line.
1
2
3
4
Fig. 74