Kyocera ECOSYS P4040dn Operation Manual Download Page 30

Page: 30 / 318

Preparation before Use

2-8

Click

View License Agreement

and read the License Agreement.

Click

Accept

Select

Express Install

tab.

Select the device to be installed.

You can also select

Use host name for port name

and set to use the

host name of the standard TCP/IP port. (A USB connection cannot be
used.)

Select the package to be installed.

Packages include the following software:
• Driver Package

KX DRIVER, Status Monitor, Fonts

Click

Install

Note

To install Status Monitor, it is necessary to install

Microsoft .NET Framework 4.0 beforehand.

Note

The machine cannot be detected unless it is on. If the

computer fails to detect the machine, verify that it is
connected to the computer via a network or USB cable and
that it is turned on and click

(Reload).

Summary of Contents for ECOSYS P4040dn































































































































































































































































































































Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands

Kyocera ECOSYS P4040dn, Operation Manual

Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands