Kyocera ECOSYS P4040dn Operation Manual Download Page 120

Page: 120 / 318

Operation Panel

4-54

Press

to select Target Size / Reduction Ratio and move the

position being entered.

Press

to change to the Target Size required. Only the Target

Size / Reduction Ratio changes.

Press

[OK]

. The Reduced Print is set and the

Page Setting

reappears.

Orientation (Print orientation)

You can select portrait (upright) or landscape (sideways) page orientation.

In the

Page Setting

menu, press

to select

Orientation

Press

[OK]

. The

Orientation

screen appears.

Press

to select the desired Orientation.

Press

[OK]

. The orientation is set and the

Page Setting

reappears.

LF Action (Linefeed)

This procedure instructs the printer what to do when it receives a linefeed code (0AH).

• LF Only: Linefeed is performed (Default).
• LF and CR: A linefeed and carriage return are performed.
• Ignore LF: The linefeed is ignored.

In the

Page Setting

menu, press

to select

LF Action

Press

[OK]

. The

LF Action

screen appears.

Press

to select the desired action.

Press

[OK]

. The action is set and the

Page Setting

reappears.

Reduced Print:

Cassette

100%

Portrait Orientation

Landscape Orientation

Orientation:

Portrait

Landscape

LF Action:

LF Only

LF and CR

Ignore LF

Summary of Contents for ECOSYS P4040dn































































































































































































































































































































Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands

Kyocera ECOSYS P4040dn, Operation Manual

Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands