Kyocera ECOSYS P4040dn, Operation Manual

Page: 227 / 318

5-25
Document Box
Delete a File
Delete the file(s) selected in the Job Box.
1
In the file list screen, select the item and press [OK] . The
Print
/
Delete
menu screen appears.
2
Press
U
or
V
to select
Delete
and press [OK]
.
A confirmation
message is appears.
3
Press
[Yes]
( [Left Select] ). The message
Completed.
appears
and the printer deletes the selected job.
Pressing
[No]
( [Right Select] ) returns to the file list screen.
Private/Stored (Printing a Private Print/Stored Job)
In private printing, you can specify that a job is not printed until you release the job from the operation panel. When sending
the job from the application software, specify a 4-digit access code in the printer driver. The job is released for printing by
entering the access code on the operation panel ensuring confidentiality of the print job.
In the stored job mode, access codes are not mandatory, but can be set on the printer driver. Then, the access code must
be entered on the operation panel to print a stored job. Print data will be stored in the SSD or RAM disk after printing.
The following operations are possible:
• Printing a Private/Stored Job...5-25
• Print a File...5-26
• Deleting a Private/Stored Job...5-27
• Delete a File...5-27
Printing a Private/Stored Job
1
In the
Job Box
menu, press U or V to select
Private/Stored
.
2
Press [OK] . The
Private/Stored
screen appears listing the user
names for stored jobs.
3
Press U or V to select the user name you entered in the printer
driver.
User 01
Delete
Print 01
02
Delete.
Are you sure?
Yes No
Document_201408…
Completed.
Note Refer to the Printer Driver User Guide for the driver settings.
Private/Stored:
User 01
User 02
User 03