Kyocera ECOSYS P4040dn, Operation Manual

Page: 135 / 318

4-69
Operation Panel
2
Press [OK] . The
Custom Setup
menu screen appears.
The following operations are possible:
• Netwk Name (SSID) (Registration of the access point's SSID)
• Connection Mode (Switch between connection modes)
• Channel (Channel settings)
• Netwk Authentic. (Network Authentication setting)
• Encryption (Encryption settings)
Netwk Name (SSID) (Registration of the access point's SSID)
This sets the SSID (Service Set Identifier) for the wireless network access point the machine will be connected to.
1
In the
Custom Setup
menu, press
U
or
V
to select
Netwk
Name(SSID)
.
2
Press [OK] . The
Netwk Name(SSID)
entry screen appears.
3
Enter the access point's SSID using the numeric keys.
4
Press [OK] . The
Custom Setup
menu reappears.
Connection Mode (Switch between connection modes)
This selects the method for connecting to the wireless network. Set
Ad Hoc
when machines will be connected directly with
each other, without going through an access point.
1
In the
Custom Setup
menu, press
U
or
V
to select
Connection
Mode
.
2
Press [OK] . The
Connection Mode
screen appears.
The available Connection Mode are as follows:
Ad Hoc
(Connect without going through access points)
Infrastructure
(Connect via an access point)
3
Press U or V to select the connection mode.
4
Press [OK] . The
Custom Setup
menu reappears.
Channel (Channel settings)
This sets the Channel to be used in the wireless network.
1
In the
Custom Setup
menu, press U or V to select
Channel
.
2
Press [OK] . The
Channel
screen appears.
Custom Setup:
Channel 03
Connection Mode 02
01 Netwk Name(SSID)
Connect Exit
Netwk Name(SSID):
Text
ABC
Note
Up to 32 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2 .
Connection Mode:
Ad Hoc 01
Infrastructure 02 *
Channel:
11
(1 - 11)