Kyocera ECOSYS P4040dn, Operation Manual

Page: 169 / 318

4-103
Operation Panel
HTTPS (SSL Server HTTPS setting)
HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds SSL data encryption, message authentication and a
digital signature function to the HTTP protocol used for data transfer between WWW servers and clients.
S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL. The default setting is
On
.
1
In the
SSL Setting
menu, press U or V to select
HTTPS
.
2
Press [OK] . The
HTTPS
screen appears.
3
Press U or V to select whether HTTPS is enabled.
4
Press [OK] . The HTTPS setting is set and the
SSL Setting
menu
reappears.
IPSec (IPSec setting)
IPSec (IP Security Protocol) is a security protocol adopted as the standard by the IETF for authentication and encryption in
the third network layer (IP layer).
It can be used with both IPv4 and IPv6.
The default setting is
Off
.
1
In the
Network Security
menu, press
U
or
V
to select
IPSec
.
2
Press [OK] . The
IPSec
screen appears.
3
Press
U
or
V
to select whether IPSec is enabled.
4
Press [OK] . The IPSec setting is set and the
Network Security
menu reappears.
ThinPrint (Thin Print setting)
Select whether or not to communicate using ThinPrint. SSL settings can also be selected. The default setting is
On
.
1
In the
Network Security
menu, press U or V to select
ThinPrint
.
2
Press [OK] . The
ThinPrint
menu screen appears.
3
Press
U
or
V
to select
Off/On
.
HTTPS:
Off 01
On 02 *
Note
IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP addresses.
IPSec:
Off 01
On 02
*
Note
Thin Print
is only displayed when the optional UG-33 has been activated.
ThinPrint:
Off/On
Exit
ThinPrintOverSSL
01
02