Kyocera ECOSYS P4040dn, Operation Manual

Page: 126 / 318

Operation Panel
4-60
3
Use the numeric keys or press U or V to set the subnet mask.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing
U
or
V
.
Use
Y
and
Z
to move the position being entered, which is shown
highlighted.
4
Press [OK] . The subnet mask setting is stored and the
IPv4
Setting menu reappears.
Default Gateway (Gateway setting)
Gateway generally refers to a protocol conversion device used to allow networks with differing protocol systems to
interconnect.
For example, a "Gateway" device is required to connect a different closed network (using its own protocols) to the open
Internet (using TCP/IP).
By installing a gateway, the communications protocols and data display modes on different networks can be made
compatible.
On TCP/IP networks, the term gateway is used to refer to routers.
1
In the
IPv4 Setting
menu, press
U
or
V
to select
Default
Gateway
.
2
Press [OK] . The
Default Gateway
screen appears.
3
Use the numeric keys or press U or V to set the default gateway.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing
U or V .
Use
Y
and
Z
to move the position being entered, which is shown
highlighted.
4
Press [OK] . The default gateway is stored and the
IPv4 Setting
menu reappears.
Bonjour (Bonjour setting)
Bonjour, also known as zero-configuration networking, is a service that automatically detects computers, devices and
services on an IP network.
Bonjour, because an industry-standard IP protocol is used, allows devices to automatically recognize each other without an
IP address being specified or DNS server being set.
Bonjour also sends and receives network packets by UDP port 5353. If a firewall is enabled, the user must check that UDP
port 5353 is left open so that Bonjour will run correctly. Some firewalls are set up so as to reject only certain Bonjour packets.
If Bonjour does not run stably, check the firewall settings and ensure that Bonjour is registered on the exceptions list and
that Bonjour packets are accepted. If you install Bonjour on Windows XP Service Pack 2 or later, the Windows firewall will
be set up correctly for Bonjour.
1
In the
IPv4 Setting
menu, press U or V to select
Bonjour
.
Note Before you enter the gateway, be sure to set the
DHCP
setting to
Off
.
Default Gateway:
0. 0. 0. 0