Kyocera ECOSYS P4040dn, Operation Manual

Page: 170 / 318

Operation Panel
4-104
4
Press [OK] . The
Off/On
screen appears.
5
Press U or V to select whether Thin Print is enabled.
6
Press [OK] . The Thin Print is set and the
ThinPrint
menu
reappears.
When Thin Print is set to
On
, the settings for
Thin Print over SSL
are displayed, so continue on and set these.
7
Press U or V to select
ThinPrintOverSSL
.
8
Press [OK] . The
ThinPrintOverSSL
screen appears.
9
Press U or V to select whether Thin Print over SSL is enabled.
10
Press [OK] . The Thin Print is set and the
ThinPrint
menu
reappears.
LAN Interface (LAN Interface setting)
Specify the settings for the LAN interface to be used. The default setting is
Auto
.
1
In the Network Security menu, press
U
or
V
to select
LAN
Interface
.
2
Press [OK] . The
LAN Interface
screen appears.
The available LAN Interfaces are as follows:
Auto
10BASE-Half
10BASE-Full
100BASE-Half
100BASE-Full
1000BASE-T
3
Press
U
or
V
to select the desired LAN Interface.
4
Press [OK] . The LAN Interface is set and the
Network Security
menu reappears.
I/F Block Set. (External interface block setting)
You can use this to block and thereby protect the interface.
The options available in I/F Block Set. are as follows:
• USB Host (USB Port setting)...4-105
• USB Device (USB interface setting)...4-105
• Option I/F (Optional network interface setting)...4-105
• Parallel I/F (Parallel interface setting)...4-106
• USB Storage (USB memory setting)...4-106
Off/On:
Off 01
On 02 *
ThinPrint:
Off/On
Exit
ThinPrintOverSSL
01
02
ThinPrintOverSSL:
Off
01
On
02
*
LAN Interface:
Auto 01
10BASE-Half 02
*
10BASE-Full 03