Kyocera ECOSYS P4040dn, Operation Manual

Page: 158 / 318

Operation Panel
4-92
1
In the
Timer Setting
menu, press U or V to select
Power Off
Rule
.
2
Press [OK] . The
Power Off Rule
menu screen appears.
3
Press
U
or
V
to select the condition to be set.
4
Press [OK] . The screen for the condition selected is displayed.
5
Press
U
or
V
to select whether or not to have the power switch off.
6
Press [OK] . Set to switch the power off and the
Power Off Rule
menu reappears.
Power Off Timer (Power off timer settings)
The time until the power turns off can be set. The default setting is 1 hour.
1
In the
Timer Setting
menu, press U or V to select
Power Off
Timer
.
2
Press [OK] . The
Power Off Timer
screen appears.
3
Press
U
or
V
to select the time until the power goes off automatically.
The times that can be set are 1 hour, 2 hours, 3 hours, 4 hours, 5
hours, 6 hours, 9 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5
days, 6 days and 1 week.
4
Press [OK] . Set the time until the power switches off and the
Timer
Setting
menu reappears.
Auto Err. Clear (Auto error clear setting)
If an error that still allows you to continue printing occurs, the next received data is automatically printed after a set period
of time elapses.
For example, if the printer is shared over a network as a network printer and one person causes one of the above errors,
after the set period of time elapses, the data sent from the next person is printed. The default setting is
Off
(Auto Error
Clear disabled).
The auto clear errors are:
Print overrun.
KPDL error.
SSD error.
RAM disk error.
Power Off Rule:
USB Host
Exit
03
USB Cable
02
01
Network
Network:
Off 01
On 02
*
Note
Repeat steps 3 to 6 to set for a different condition.
Power Off Timer:
1 hour 01
2 hours 02
*
3 hours 03