Kyocera ECOSYS P4040dn, Operation Manual

Page: 285 / 318

A-11
Appendix
6
Replace the cover and close the rear cover.
Network Interface Kit (IB-50)
The Network Interface Kit is a high-speed interface for communications speeds of 1 gigabit per second. In addition to the
TCP/IP and NetBEUI supported by the machine's standard network interface, it also supports IPX/SPX and Apple Talk, so
network printing becomes possible in various environments, including Windows, Macintosh, UNIX and Netware.
The installation method is the same as for SSD. Refer to SSD (HD-6/HD-7) on page A-10 .
Wireless Network Interface Kit (IB-51)
This is a Wireless Network Interface Kit which supports the wireless network specifications IEEE802.11n (Max 300 Mbps)
and 11 g/b.
With the utilities supplied, settings are possible for a variety of OS and network protocols.
The installation method is the same as for SSD. Refer to SSD (HD-6/HD-7) on page A-10 .
Parallel Interface Kit (IB-32)
The parallel interface kit supports communications speeds up to 2 Mbps. Use a parallel printer cable when this option is
used.
Installing Parallel Interface Kit
1
Power off the printer and unplug the printer power cord.
2
Open the rear cover and remove the interface cover and power cord
connector cover.
3
Unscrew five screws at the back of the main controller board.