Kyocera ECOSYS P4040dn Operation Manual Download Page 269

Page: 269 / 318

8-19

Troubleshooting

Remove any partially fed paper.

Push the cassette back in securely. The printer warms up and
resumes printing.

Duplex Unit

Paper is jammed in the duplex section. Remove the jammed paper using the procedure given below.

Pull out the cassette from the machine.

Open the duplex front cover and remove any jammed paper.

Note

Check to see if paper is loaded correctly. If not, reload

the paper.

IMPORTANT

When pulling out the cassette from the machine,

ensure that it is supported and does not fall out.

Summary of Contents for ECOSYS P4040dn































































































































































































































































































































Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands

Kyocera ECOSYS P4040dn, Operation Manual

Search results

Summary of Contents for ECOSYS P4040dn

Reviews:

Related manuals for ECOSYS P4040dn

Brands by name

Popular brands