InfiniSource ETC 100, Hardware Manual

Page: 24 / 234

12 Infinisource
Additional Clock Codes
B (Bell): This means that the clock includes a relay switch to operate an
external bell or other signal device. Every clock has the relay option, but
the physical relay itself will only be installed if this code appears with
the regular clock code. For example, 100 B, 100 M B, etc.
Note: The “B (Bell)” code is only used with ETC Model time clocks.
IntelliClocks (IQ Clocks)
Once you have determined your clock type, refer to “IntelliClock Setup
Instructions” on page 23 for instructions on installing and connecting
your time clock.
IQ 300 Clocks
For model-specific clock usage instructions, see “IQ 300 Clock” on
page 35.
• 300 S: Model IQ 300 IntelliClock with Serial communication. A
Serial clock is connected directly to a computer’s serial com port.
See page 27 for instructions on installing a Serial time clock.
• 300 D: Model IQ 300 IntelliClock Daisy. A Daisy clock is not
physically connected to a computer or phone line, but is “chained”
to a Master time clock. Any Serial clock can be used as the Master
in a Daisy Chain.
• 300 M: Model IQ 300 IntelliClock with Modem communication. A
Modem clock is connected directly to an analog ( not digital) phone
line. See page 27 for instructions on installing a Modem time clock.
• 300 IP: Model IQ 300 IntelliClock with Ethernet communication.
An Ethernet clock is connected directly to a network hub or server,
and is seen by the system as a “Network Device.” See page 28 for
instructions on installing an Ethernet time clock.
• 300 PoE: A Model IQ 300 Ethernet clock with PoE support. See
page 189 for more information on PoE support.