InfiniSource ETC 100, Hardware Manual

Page: 152 / 234

140 Infinisource
This message denotes the general quality of the template read. You
want the “QUALITY” to be as high as possible. Press the soft key
under “YES” to accept the template read. Press the button below
“NO” to have the clock read the template again.
11. If the “QUALITY” read is too low, the following message may
appear:
QUALITY: [X]/100
QUALITY LOW
RETRY ACCEPT
If you get this message, you can have the employee moisten his or
her finger slightly. Moisture helps the reader collect a high quality
reading of the finger.
Once the first scan is accepted, a second scan is performed on the same
finger. Repeat the above steps.
Deleting Existing Finger ID Records
To delete a finger ID record, from the “Manage Finger IDs” menu select
2 for “Delete.” The clock asks you to enter the card number of the
employee whose templates are to be deleted. Type in the card number
and press <ENTER>. The following message appears:
PLEASE CONFIRM - OK
TO DELETE TEMPLATES
FOR CARD [X]?
YES NO
Press the soft key under the “YES” option to delete this employee’s
stored finger ID templates.
Setting the Global Security Level
Use the following instructions to change the global security level.
1. Press the <MENU> button on the keypad, select the “Admin” menu
option, and enter your card number and password.
2. Press 2 for “Manage Finger IDs.”
3. Press 4 for “Global Security.” The following message appears: