InfiniSource ETC 100, Hardware Manual

Page: 208 / 234

196 Infinisource
Software Installation
The utility that the Enrollment Station uses is installed from the main
TimeForce installation disk. The utility must be installed on the machine
that the Enrollment Station is physically connected to. This machine
must also have access to the TimeForce program database.
1. Insert the TimeForce installation disk into your computer's CD-
ROM drive. The main Installation Menu should automatically
appear. If it does not, open My Computer or Windows Explorer,
right-click on the icon for the appropriate CD-ROM drive, and
select “Run.”
2. From the main Installation Menu, click on the [UTILITIES] icon.
3. Click on the [ENROLL] icon. A dialog box appears which reads
“This will install Enrollment Station. Do you wish to continue?”
Click on the [YES] icon.
4. The InstallShield Wizard opens with a Welcome screen. Click on
the [NEXT] icon to continue.
5. The Destination Directory screen opens. Select the directory
where you would like the Enrollment Station utility to be installed.
Click on the [BROWSE] icon to select the desired directory. Once
you have specified the desired installation directory, click on the
[NEXT] icon to continue.
Note: It is recommended that you allow the utility to install to its
default location of “C:\Program Files\Qqest Software Sys-
tems\TimeForce.”
6. The Program Folders screen opens. Select the directory in the
Windows Start Menu where you would like the program icons to be
created. The default location is “TimeForce.” Click on the [NEXT]
icon to continue.
7. The Current Settings screen opens. Review the displayed installa-
tion settings. If you need to make any changes, click on the
[BACK] icon. Click on the [NEXT] icon to begin the program
installation.
8. Once the installation has completed successfully, click on the [FIN-
ISH] icon to exit the InstallShield Wizard.