InfiniSource ETC 100, Hardware Manual

Page: 148 / 234

136 Infinisource
3. From the Existing Clocks section of the screen, click on the [EDIT/
VIEW] icon.
4. The program allows you to search for existing clock profiles based
on the clock group that they are assigned to. Make the desired
selection from the
Group drop-down menu. Select “All” to bring
up all time clock profiles.
5. Click on the [DISPLAY] icon. The found clock profiles are dis-
played.
6. Locate the desired clock profile in the list, and click on the link in
the
Number column. The clock profile opens. The Jobs at the
Clock setup is located in the bottom section of the screen.
7. Remove the check mark from the Send All Jobs option. The
Assigned Jobs section appears.
8. All jobs are displayed in the Job Unselected box. Highlight the
desired jobs and click on the icon (hold down the {CTRL} key
on your keyboard to select multiple jobs). The selected jobs are
moved to the
Job Selected box.
9. To unassign jobs, highlight the desired names in the Job Selected
box and click on the icon. The selected jobs are moved to the
Job Unselected box.
10. Click on the [UPDATE] icon located at the bottom of the screen to
save the changes that you have made.
Tasks at the Clock
This section will only be available if you are using the Job Tracking
module of the TimeForce system.
Use this option to define which Tasks your employees will be allowed to
punch into from this time clock. If an employee attempts to punch into a
task that is not assigned to this clock, an error message will appear stat-
ing that a supervisor override is necessary to complete this punch. A
supervisor can then enter their clock password and accept the punch, if
desired.
By default all tasks are allowed at the time clock. Use the following
instructions to restrict tasks.