TimeForce II Hardware Guide
81
Using the Model IQ 1000 IntelliClock
Set Clock ID
When you select this option, you receive the following prompt:
ENTER CLOCK ID
CURRENTLY: [X]
The Currently field shows the current clock ID. By default, this is 1. To
change the clock ID, type in the new ID and press <ENTER>.
Scan Data Memory
This option scans the data being stored by the time clock looking for
data that is outside of its known pointers. If data is found, the pointers
are reset to include the found data, making the information available for
download. This option is intended for use by Infinisource Technical
Support.
Clear Emp, Times
This option clears all information that has been uploaded to the clock
from the TimeForce system (such as employees, departments, default
schedules, etc.). This option is
not
reversible. Once deleted, data must
be re-uploaded to the clock using the ClockLink program.
When you select this option, you receive the following prompt:
THIS WILL DELETE ALL
COMPANY AND EMPLOYEE
INFO AND IS
** IRREVERSABLE! **
CONFIG IS UNCHANGED
ARE YOU SURE??
The <NO> and <YES> buttons are the two gray rectangular buttons
above the numeric keypad on the clock face. The button on the left is the
<NO> button and the one on the right is the <YES> button. This option
is restricted for security purposes. A menu will appear asking you to
enter a passcode. To obtain this passcode, call Infinisource Technical
Support at 1-800-697-7010.
Set Global Timeout
This option allows you to configure the number of seconds for which
menus are displayed on the face of the time clock before the clock times
out and returns to the main “ready” screen.
Summary of Contents for ETC 100
