InfiniSource ETC 100, Hardware Manual

Page: 112 / 234

100 Infinisource
LED Status Light
A red LED status light appears on the battery pack, located on the right-
hand side of the backup pack board. This light will inform you of the
status of your backup pack.
• When the battery pack is fully charged and not in use, the status
light is off.
• When charging, the status light is on.
• When the battery backup is in use, the status light will be off.
On Demand Ethernet Settings
The IQ 1000 On Demand clock uploads its stored data to the Clock
Server automatically. This makes the process manually connecting to
your time clock for the purpose of downloading its stored punches
unnecessary.
The clock automatically uploads any stored data to the Clock Server
immediately upon its entry into the clock. Manual data upload can also
be selected.
Note:
The following setup instructions are specific to the Push Clock options.
All other ethernet setup steps are identical to the IQ 1000 Ethernet
clock.
Setting the IP Address
The time clock uploads its data to the Clock Server software. Before
your clock will be able to successfully transfer punches, you must first
enter the IP Address.
Note: See page 5 for instructions on setting up the Clock Server. You
may have chosen to use a Clock Server hosted by Infinisource. In this
case, the server IP should have been supplied to you at the time of pur-
chase.
1. From the keypad of the clock, press the <MENU> button and select
“ADMIN.”