74
Infinisource
ENTER JOB #:
OR PRESS A KEY BELOW
TO SELECT FROM A LIST
JOB #:
6.
There are two methods of specifying a job at the clock:
•
Job Number:
Enter the number assigned to the job in the Time-
Force system and press <ENTER>. If you are using an optional
barcode wand or gun, you can also scan a job barcode.
•
Job List:
To select the desired job from a list of jobs that have
been uploaded to the time clock, press either one of the grey
buttons located above the number pad on the clock keypad.
Use the up and down arrow buttons to scroll though the avail-
able jobs. Once the desired job in the list is highlighted, press
<ENTER> on the clock keypad.
Note:
The job list contains the job profiles from the TimeForce
software that you have uploaded to the IQ 1000 using the
ClockLink utility.
7.
The following message appears on the clock:
JOB, TASK OR QTY
ENTER = FINISHED
8.
If you are finished entering punch information, press the <ENTER>
key to save the punch entry. Press the <TASK> key to enter task
information, or the <QTY> key to enter a quantity.
9.
Press the <TASK> key to specify a task with the punch. The fol-
lowing message is displayed:
ENTER TASK #:
OR PRESS A KEY BELOW
TO SELECT FROM A LIST
TASK #:
10. There are two methods of specifying a task at the clock:
•
Task Number:
Enter the number assigned to the task in the Time-
Force system and press <ENTER>. If you are using an optional
barcode wand or gun, you can also scan a task barcode.
Summary of Contents for ETC 100
