InfiniSource ETC 100, Hardware Manual

Page: 42 / 234

30 Infinisource
The following settings must be specified before your time clock will
communicate:
• IP Address
• Subnet Mask
• Gateway
• SSID
These settings are specific to your network setup. Infinisource cannot
supply these settings.
1. From the clock keypad, press the <MENU> button and select
“Admin.”
2. Enter an administrator ID (or Card #) and press the <ENTER> key.
Note: The default administrator ID is “8888.”
3. Enter the password (or PIN) for the entered administrator ID and
press the <ENTER> key.
Note: The password for the default admin ID is “1111.”
4. From the Main Admin Menu, press 1 for “System Maintenance.”
5. Press 3 for “Ethernet.” This menu contains the time clock’s ethernet
options.
Set IP Address
From the Ethernet Menu, press 1 for “Set IP Address.” The following
prompt appears:
SET NEW IP ADDRESS:
CURRENTLY:
ENTER NEW IP:
The “Currently” field displays the current IP address. To change the
clock IP address, type in the new address at the clock keypad (remember
to use the period key) and press <ENTER>.