InfiniSource ETC 100, Hardware Manual

Page: 192 / 234

180 Infinisource
Figure HARDWARE-4: IQ 300, 400 or 500 Bell Connection
10. Tighten both screws to secure the wires.
11. Attach the clock and bell to the wall in their respective locations.
12. Connect the clock and bell to their power sources and reconnect the
clock’s communication cable.
Note: In order to use your bell/buzzer, you must first set up “Relay
Events.” Consult the section of this guide pertaining to your clock type
for further instructions on setting up and using Relay Events.