InfiniSource ETC 100, Hardware Manual

Page: 130 / 234

118 Infinisource
Relay Events are assigned to time clock profiles in TimeForce II. Use
the following instructions to assign relay events to your time clock pro-
files.
Note: The option to edit Relay Events will only appear if the “Upload
Relay Events” option is selected in the time clock profile.
1. Open the TimeForce II software and log in as an administrator-level
user.
2. Click on the main “Clocks” navigation tab at the top of the screen.
3. From the Existing Clocks section of the screen, click on the [EDIT/
VIEW] icon.
4. The program allows you to search for existing clock profiles based
on the clock group that they are assigned to. Make the desired
selection from the
Group drop-down menu. Select “All” to bring
up all time clock profiles.
5. Click on the [DISPLAY] icon. The found clock profiles are dis-
played.
6. Locate the desired time clock, and click on the “View” link in the
Relay Events column.
Note: This link will only appear if the “Upload Relay Events”
option is selected in the time clock profile.
7. To create a new relay event, click on the [ADD] icon.
8. In the Relay Time column, enter the time of day that this event is to
be activated. The time must be entered in 24-hour format.
9. In the Duration Seconds column, enter the number of seconds that
you want the bell or buzzer to sound for when the event is activated.
10. When the relay event occurs, it can either pulse for its duration or it
can sound continuously. With Pulse selected, the bell or buzzer
sounds as a series of pulses (on...off...on...off...on...off) for the
duration of the event. If not selected, the bell or buzzer sounds con-
tinuously for the duration of the event.
11. Put a check mark in the box for each day of the week on which you
want this event to occur.
12. Click on the [ADD] icon to insert additional events. Click on the
[SAVE] icon to save the changes that you have made.