160
Infinisource
8.
If a specific port number is required, enter it at the clock keypad.
Press the upper-right soft key to automatically populate this setting
with the default of “5402.”
Note:
In most cases, the default setting will be used.
9.
Press the <ENTER> key to save the changes that you have made.
You can now exit the clock menu.
Set Dial Times
The time clock allows you to specify how stored punches are uploaded
to the database.
1.
From the keypad of the clock, press the <MENU> button and enter
your password.
2.
Select 1 for “ADMIN.”
3.
Select 3 for “CLOCK SETUP.”
4.
Select 1 for “COMMUNICATION.”
5.
Select 4 for “OUTBOUND OPTIONS.”
6.
Select 2 for “OUTBOUND CALL TIMES.”
7.
The “Outbound Call Times” screen opens. The following options
are available:
•
Every Midnight:
With this option selected, the clock will send
all punches accumulated during the day to the Clock Server at
12:00 am.
•
9, 1, & 6:00:
This option is intended to send punches when
there are fewer employees actively punching at the clock.
Punches will be sent at 9:00 am, 1:00 pm and 6:00 pm.
•
Manual Only:
With this option selected, the clock will not
automatically send its stored punches. The punches will remain
in the clock until a manual upload is initiated.
Note:
See the section below for instructions on manually
uploading your time clock.
•
Real Time:
With this option enabled, all punches entered at
the clock will be immediately uploaded to the Clock Server.
Summary of Contents for ETC 100
