InfiniSource ETC 100, Hardware Manual

Page: 165 / 234

TimeForce II Hardware Guide 153
Velocity Clocks
Clock ID/Pass
This menu allows you to view and edit the ID and password that your
clock uses to communicate. See “How Do I Find the V800 / V850 Clock
ID and Password?” on page 105 for detailed instructions on this menu.
Keypad Behavior
This menu allows you to specify how the clock keypad functions, and
contains the following options:
1. KEY CLICK
2. IN/OUT KEYS
3. MEAL/BREAK KEYS
4. KEY TONES
5. AUTO-ENTER ID
6. JOB KEY
7. DEPARTMENT KEY
8. TIPS KEY
Key Click
Enable this option if you want the clock to emit a short beep every time
a key is pressed.
In/Out Keys
This option enables the <IN> and <OUT> keys on the clock keypad.
Enable this option if you would like your employees to be able to spec-
ify an “in” or “out” status with their punches.
Note: This option is not required. The TimeForce system automatically
determines punch “in/out” order.
Meal/Break Keys
This option enables the <MEAL> and <BREAK> keys on the clock
keypad. Enable this option if you would like to allow your employees to
specify a punch as a “meal” or “break” punch.
Key Tones
This option allows you to enable or disable the tones that the clock emits
when a punch is accepted.
Note: It is not possible to disable punch error tones.