InfiniSource ETC 100, Hardware Manual

Page: 154 / 234

142 Infinisource
PRESS GRAY KEYS OR
IN/OUT, MEAL/BREAK
[ENTER] TO ACCEPT
Note: The clock will only display the punching options that have
been enabled in the clock’s System Options menu.
4. Press the <ENTER> key to complete the time & attendance entry.
Note: The <ENTER> key should always be pressed when complet-
ing a punch at the time clock, unless the “Quick Punch” system
option is enabled. See “Quick Punch” on page 156.
Job Tracking Entries
Use the following instructions to enter punches at the time clock which
are assigned to job and task information in the TimeForce system.
1. Check to see that the clock display reads “Ready” with the date and
time displayed at the top of the screen, and the Company Message
at the bottom (if applicable).
2. Enter your card number at the clock keypad and press <ENTER>.
The display panel shows the card number and reads:
CARD #[X]
READING FINGER ID
PUT FINGER
ON SENSOR
3. Place your finger on the template reader. To ensure correct place-
ment, the finger should be placed with the first joint of the finger
against the raised ridge at the base of the reader screen, and with the
fingertip pressed firmly against the screen. Once your finger ID has
been verified, the following message is displayed:
PRESS GRAY KEYS OR
IN/OUT, MEAL/BREAK
[ENTER] TO ACCEPT
Note: The clock will only display the punching options that have
been enabled in the clock’s System Options menu.
4. Press the <JOB> key on the clock keypad. The following message
is displayed: