InfiniSource ETC 100, Hardware Manual

Page: 128 / 234

116 Infinisource
Note: See “How Do I Find the V800 / V850 Clock ID and Pass-
word?” on page 105 for further instructions.
7. Enter a Description for this clock as you would like it to appear in
TimeForce II and ClockLink.
8. If you would like to assign this clock to a group, make the desired
selection from the
Group Name drop-down menu.
Note: See page 211 for instructions on creating clock groups.
9. If you would like to assign the clock to a Default Department
level, click on the “No Department” link, and make the desired
selection from the tree-directory that appears.
10. The Vacation Time drop-down menu contains each accrual policy
that you have inserted into the TimeForce system. Select the policy
that employee vacation time is deducted from. This setting allows
your employees to log into the time clock and view their available
vacation hours.
11. The Sick Time drop-down menu contains each accrual policy that
you have inserted into the TimeForce system. Select the policy that
employee sick time is deducted from. This setting allows your
employees to log into the time clock and view their available sick
time hours.
12. If you would like to upload relay events to the time clock, put a
check mark in the Upload Relay Events field. See “Relay Events”
on page 130 for more information.
13. Select the Time Zone that the clock will reside in from the drop-
down menu.
14. Enter any desired Note s about this time clock in the provided text-
entry field.
15. Select the Connection Type from the drop-down menu. The steps
to completing the clock profile vary slightly depending on what
connection type you are using.
• Ethernet: Put a check mark in the DHCP option to use
Dynamic Host Configuration Protocol. Otherwise, enter the IP
Address where the clock can be reached. Remember to use
periods. If the clock can only be reached using a specific port
number, enter the appropriate port into the
Port Number field.
Leave this field blank to use the default port.