InfiniSource ETC 100, Hardware Manual

Page: 100 / 234

88 Infinisource
21 Task Restriction
This option allows you to restrict Tasks at the time clock.
With this option enabled, the time clock will only accept
Task Numbers that have been sent to the clock from the
TimeForce II system. All other numbers will be rejected.
Disable this option to accept
all Task Numbers.
22 Dept Restriction
This option allows you to restrict Departments at the time
clock. With this option enabled, the time clock will only
accept Department Numbers that have been sent to the
clock from the TimeForce II system. All other numbers will
be rejected. Disable this option to accept
all Department
Numbers.
23 Time Correction
When enabled, this option disables Relay Events and
Door Security and uses relay closure to synchronize elec-
tronic time clocks to IQ time using 3-wire synchronization.
Minute synchronization will occur each hour at 58 minutes
past the hour. Hour synchronization will occur at 5:58 AM
and PM.
24 Receipt Print
With this option selected, a reciept will be printed for each
successful punch. This option should only be enabled
when using a printer attached to the clock. Excessive wait
times will occur if this option is not disabled when no
printer is in use.
Note: When using this feature, System Option #3 must
also be enabled.
25 Track1 Decoding
Enables decoding of magstripe data as track 1 (7-bit) data
instead of track 2 (5-bit) data.
Note: This option is mutually exclusive with other decode
format options.
26 Zonar Decoding
Enables the retrieval of Binary Coded Decimal data (or
Zonar Decoding) on a time card (magstripe or Proximity).
Note: This option is mutually exclusive with other decode
format options.
27
CIC Magstripe
Decoding
Enables decoding of CIC-encoded HID Proximity cards
(37-bit Wiegand).
Note: This option is mutually exclusive with other decode
format options.
TABLE: Hardware-2: IQ 1000 Clock Options
Number Name Description