TimeForce II Hardware Guide
203
Finger Enrollment Station
3.
The card number is detected within the TimeForce database. The
assigned employee's name is displayed in the header at the top of
the screen. Any finger templates that currently exist for this
employee within the TimeForce database are displayed on the left.
The
New Finger Template
section of the screen is where new tem-
plates are enrolled.
4.
To enroll a new template, click on the [ENROLL] icon. A message
appears which reads “Place Finger on Reader.”
5.
Have the employee place his or her finger on the sensor, fitting the
joint of the first knuckle against the Ridge Lock located at the bot-
tom of the sensor.
6.
The Enroll Station scans the employee's finger. When completed,
the
Quality
and
Content
of the scan is displayed. Ideally, both set-
tings should be as high as possible.
Note:
See “Enrolling Legible Finger Templates” on page 198 for
more information on the “Quality” and “Content” settings.
7.
The following options are available:
•
If the “Quality” or “Content” is low, click on the [ENROLL]
icon again to re-scan the finger template. A message appears
which reads “Do You Want to Save the Current Template?”
Click on the [YES] or [NO] icon as desired.
Note:
The [YES] icon will only appear if both the “Quality”
and “Content” scores are above 50%.
•
Click on the [VERIFY] icon to re-scan the employee's finger
for the purpose of comparing the new scan with the enrolled
template. The
Verify
status is displayed. This setting should be
as high as possible. If the setting is low, re-enroll the template.
•
Click on the [SAVE] icon to save the finger template. This
option does not appear if either the “Quality” or “Content”
scores are below 50%. Saved templates are displayed under the
Templates
header on the left-hand section of the screen.
Note:
Saved templates are displayed by index number. This
number is assigned based on how many templates exist for this
employee.
•
If the “View Image” setting is enabled, the [IMAGE] icon will
also be available. See “Viewing a Template Image” below for
more information on this option.
Summary of Contents for ETC 100
