TimeForce II Hardware Guide
99
Using the Model IQ 1000 IntelliClock
The current time is displayed at the top of the screen. The following
prompt appears:
ENTER TIME AS hhmmss
In 24-hour format, enter the desired time as “HH/MM/SS” and press
<ENTER>. For example, a time of four o’clock p.m. would be entered
as “160000.”
The date and time setting is saved, and the clock returns to its normal
state.
IQ 1000 Battery Backup Pack
The IQ 1000 Battery Backup Pack allows you to connect an external
power supply to your time clock so that in the event of a power outage,
the clock will remain functional.
The backup pack will keep your clock running for a minimum of 2
hours. Once the clock’s main power is restored, the battery pack will
automatically recharge. Once the battery pack is drained of power, it
takes 16 hours to fully recharge.
Connecting the Battery Backup Pack
The battery backup pack plugs into the 6-prong plug located on the back
of the IQ 1000, next to the “Phone/Computer/Daisy” port. The word
“Battery” appears at the base of the plug on the clock board. Insert the
battery backup connector into the battery port and press firmly until the
connector snaps into place. The backup pack itself can then be placed
behind the time clock in the IQ 1000 mounting bracket. The clock snaps
into place over the backup pack.
Summary of Contents for ETC 100
