32
Infinisource
How Do I Find the Clock ID and Password?
The clock ID and password are stored in the time clock itself. These set-
tings can be changed from ClockLink once you have connected to the
time clock, but you must specify the clock's current ID and password
before a connection can be made.
Note:
The default clock ID is “1.” The default clock password is
“ETC.”
The following procedures are performed at the keypad of the clock
itself.
Finding the Clock ID
1.
On the clock keypad, press the <MENU> button.
2.
Enter an administrator password and press <ENTER>.
Note:
The default admin password is “1111.”
3.
Press 1 for “System Maintenance.”
4.
Press 2 for “Memory.”
5.
Press 3 for “Set Clock ID.” The “Set New Clock ID” screen opens.
6.
The “Currently” field displays the clock's current ID. If you would
like to change the clock ID, enter the desired number at the keypad
and press <ENTER>.
You can now exit the time clock menu by pressing <CLR> repeatedly
until “Ready” is shown on the clock display.
Finding the Clock Password
1.
On the clock keypad, press the <MENU> button.
2.
Enter an administrator password and press <ENTER>.
Note:
The default admin password is “1111.”
3.
Press 3 for “Passwords.”
4.
Press 3 for “Clock/Modem.” The “Passwords” screen opens.
5.
The current clock password is
not
displayed. Type in a new pass-
word at the keypad and press <ENTER>.
6.
Re-type the new password and press <ENTER>.
You can now exit the time clock menu by pressing <CLR> repeatedly
until “Ready” is shown on the clock display.
Summary of Contents for ETC 100
