TimeForce II Hardware Guide
159
Velocity Clocks
V800 / V850 On Demand Ethernet Clock
The On Demand Ethernet Clock uploads any stored data to the Clock
Server automatically. This makes the process of manually connecting to
your time clock for the purpose of downloading its stored punches
unnecessary.
The clock can automatically upload any stored data to the Clock Server
immediately upon its entry into the clock. Manual data upload can also
be selected.
Note:
The following setup instructions are specific to the On Demand options.
All other Ethernet setup steps are identical to the V800 / V850 Ethernet
clock. See page 107 for further instructions.
Setting the Push Server IP
The time clock uploads its punch data to the Clock Server software.
Before your clock will be able to successfully transfer punches, you
must first enter the Push Server ID.
Note:
See page 5 for instructions on setting up the Clock Server. You
may have chosen to use a Clock Server hosted by Infinisource. In this
case, the server IP should have been supplied to you at the time of pur-
chase.
1.
From the keypad of the clock, press the <MENU> button and enter
your password.
2.
Select 1 for “ADMIN.”
3.
Select 3 for “CLOCK SETUP.”
4.
Select 1 for “COMMUNICATION.”
5.
Select 4 for “OUTBOUND OPTIONS.”
6.
Select 3 for “PUSH SERVER IP.”
7.
From the keypad of the clock, enter the IP address of the Push
Server. Remember to use the period [ . ] key. Once the IP has been
entered, press <ENTER>. The “Port” screen appears.
Summary of Contents for ETC 100
